The DJ booth on a boardwalk with two subwoofers below and speakers on poles
← All stories
Chapter 04  ·  2026 · Sarasota  ·  1 min read

Building the Golden Hour Rig

Why I build and tune the sound system I play on, from the cabinets to the amp presets.

01

Taking it apart again

I have always needed to know what is behind the wall. As a kid it was the wires behind the TV. Later it was engines. I went to school for machining and spent years building and tuning cars. So when I started playing out, I was never going to be happy renting a pair of speakers and hoping for the best.

The rig I play on at Sunsets & Soundwaves is one I built. I call it the Golden Hour Rig.

02

The tops: SAWMOD

The tops are SAWMODs, a published DIY design by John White. Each box packs two side-firing 10 inch woofers, two 5 inch mids and a compression driver into one shared waveguide, so the whole thing behaves like a single point. That is the secret to clean sound up close, which is exactly where people stand at a sunset party.

I built the cabinets, stained and sealed them, and built the passive crossover board for the mids and highs myself.

03

The subs and the brains

Underneath are a pair of HOQS Paraflex CRAM 2x12 subwoofers. Two CVR DSP amps run the system, one per side. The SAWMOD preset was tuned by Daniel at WAAT. I set every preset as if each amp is on an ordinary 15 amp wall outlet, because the one thing I never want is a tripped breaker in the middle of a set.

Next up is WAVERACK, a Raspberry Pi music player I'm building for the amp rack, so the music between sets sounds as good as the sets.

Close-up of the CRAM subwoofers and their hex grilles
CRAM 2x12 subs
“A sound system is physics. The way it hits a group of people at sunset is something more.”
See the rig in 3D on Sunsets & Soundwaves ↗
John behind the decks in red light at KôR After Dark
Next · Chapter 05

KôR After Dark

A gym with black walls, a black ceiling and a black floor, turned into a dance floor once a month.